Axis Quicklinks are made in a variety of shapes to suit most roping activities.
Quicklinks are not suitable in situations where constant opening and closing of the connector are required. Common activities include mountaineering, caving, rope access and anchors. Can be used for connecting harnesses to lanyards, descenders or ascenders to lanyards, setting up fixed anchors.
Always make sure that the nut is completely screwed shut. Tighten with a wrench for semi permanent replacement. Always replace the Quicklink when it is used to prevent a fall. Always check your Quicklink before use for corrosion, deformation, and that the nut opens and closes smoothly. If in doubt retire the item from use.
Individually tested to Working Load Limit
Silver zinc finish
Weight: 10mm: 156 g | 8mm: 93 g
Width: 10mm: 40 mm | 8mm: 33mm
Length: 10mm: 105 mm | 8mm: 88mm
Diameter: 10mm: 10 mm | 8mm: 8mm
Break load: 10mm: 5,000 kg | 8mm: 3,250 kg
Working load limit: 10mm: 1,000 kg | 8mm: 650 kg
Be the first to review this product!
Help other shoppers by writing reviews for products you have purchased.